5. Development Platform Quick Start
5.1 Tools Setup Sequence
Start the debugging system in the following sequence:
? Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;
? Connect an EV-board to BGMA IDC10 socket;
? Select the EV-board power supply and turn on the EV-board, confirm the LED on the BGMA
is Orange and the Power LED on the EV-board is on.
5.2 Open Project and Start Debug
Users can start a debug from a PC software S OFTUNE workbench in the following sequence. Here take
IO_LED project for example.
? Start the S OFTUNE from “Startup Menu>Programs> SOFTUNE V3> FFMC-8L Family SOF-
TUNE Workbench” in Windows;
? Click “Open workspace” from “File” Menu in S OFTUNE ;
? Select “IO_LED.wsp” in “Open Space” window;
? Click “Start debug” from “Debug” Menu.
If the entire procedure goes right, a debug will start normally.
5.3Operation Precautions
? All pins of MB95200H/210H MCU are connected to Testing Pin on the EV-board. If the user
wants to test separate pin performance, do disconnect the header of related peripheral mod-
ules.
? Note that J2 shall be open while debugging using the BGMA. User reset from S3 (reset key)
is invalid when J2 is open. To use reset key S3 in a normal mode, J2 should be closed.
? It’s recommended that only one power supply is used as a power module input at a time.
20